• Output: 1000 VA / 600W


• Input: 88-139V @ 60 Hz ± 3 Hz


• 8 x Total NEMA 5-15R Outlets


• 4 x Battery Backup & Surge Outlets

Designed for high-performance computers and electronics, the Back UPS Pro BX1000M-LM60 from APC delivers premium power protection and helps protect against surges, spikes, lightning, and outages. In the case of a power outage, it can provide up to 4.3 minutes of runtime at max load and 13.5 minutes at half load. It also provides an output capacity of 1000 VA / 600W, eight total NEMA5-15R outlets (four battery backup & surge and four surge-only), an input voltage of 88-139V at 60 Hz ± 3 Hz using its 6' cord with a NEMA 5-15P plug, a surge energy rating of 1103 joules, and 1Gb of dataline protection. Its sealed, lead-acid battery is maintenance-free and can be replaced using an APCRBC158 replacement battery. The BX1000M-LM60 runs at a frequency of 60 Hz.

For areas for inconsistent power grids, Automatic Voltage Regulation (AVR) helps provide stability against voltage fluctuations, overvoltages, and brownouts. This UPS has an integrated LCD display that shows information on the utility and system status, and PowerChute Personal Edition software can help track power quality, configure alarms, and shut down your computer during an outage. Also featured is a limited lifetime data-recovery warranty, a limited lifetime $250,000 equipment protection policy, and a limited 3-year warranty for the APC unit.

General Features
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Hot-Swappable Batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

LCD Graphics Display
Text and mimic diagrams that display modes of operation, system parameters, and alarms.

User Replaceable Batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Manageability
USB Connection
Use your PC to access additional power protection and management features for your UPS via a USB port.

LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Audible Alarms
Provides notification of changing utility power and UPS power conditions.

Disconnected Battery Notification
Warns when a battery is not available to provide backup power.

Safety
Safety Agency Approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Availability
Transformer-Block Spaced Outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Green Mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable Voltage-Transfer Points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable Voltage Sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Intelligent Battery Management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-Start Capable
Provides temporary battery power when the utility power is out.

Battery Failure Notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Automatic Self-Test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Serviceability
Resettable Circuit Breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Simple Battery Replacement
Increases UPS availability by allowing quick, easy battery replacement.

Protection
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Surge Only Outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and Surge Protected Outlets
Back up and protect your hardware and data during power outages, surges, and spikes.