APC Back UPS Pro BX1500M, Compact Tower, 1500VA, AVR, LCD, 120V
High Performance Computer and Electronics UPS for Premium Power Protection
Includes: USB cable, User Manual
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
- Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Lifetime data recovery warranty
Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
- Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Pro Features & Benefits
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Manageability
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Marketing Features
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Cold-start capable
Provides temporary battery power when the utility power is out.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Serviceability
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs
Secured and trusted checkout with
- Omschrijving
-
Details
Output
Output power capacity900Watts / 1.5kVAMax Configurable Power (Watts)900Watts / 1.5kVANominal Output Voltage120VOutput Frequency (sync to mains)60 HzTopologyLine InteractiveWaveform typeStepped approximation to a sinewaveOutput Connections(5) NEMA 5-15R (Surge Protection)(5) NEMA 5-15R (Battery Backup)Transfer Time8ms typical : 10 ms maximumInput
Nominal Input Voltage120VInput frequency60 Hz +/- 3 HzInput ConnectionsNEMA 5-15PCord Length6ft (1.83meters)Input voltage range for main operations88 - 139VMaximum Input Current12.0ABatteries & Runtime
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofTypical recharge time16hour(s)Replacement BatteryRBC Quantity1Battery Volt-Amp-Hour Capacity172RuntimeEfficiencyCommunications & Management
Interface Port(s)USBControl panelMulti-function LCD status and control consoleAudible AlarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarmSurge Protection and Filtering
Surge energy rating789JoulesData Line ProtectionNetwork line - 10/100/1000 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)FilteringFull time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449Physical
Maximum Height9.84inches (250MM, 25.0CM)Maximum Width3.94inches (100MM, 10.0CM)Maximum Depth15.04inches (382MM, 38.2CM)Net Weight24.25lbs. (11.0KG)Shipping weight28.0lbs. (12.7KG)Shipping Height13.7inches (348MM, 34.8CM)Shipping Width8.94inches (227MM, 22.7CM)Shipping Depth19.33inches (491MM, 49.1CM)Units per Pallet32.0SCC Codes1073130433178 7Environmental
Operating Temperature32 - 104 °F (0 - 40 °C)Operating Relative Humidity0 - 95 %Operating Elevation0-10000ft (0-3000meters)Storage Temperature-15 - 40 °CStorage Relative Humidity0 - 95 %Storage Elevation0-50000ft (0-15000meters)Audible noise at 1 meter from surface of unit45.0dBAOnline thermal dissipation67.6BTU/hr - Reviews
-
Schrijf je eigen recensie
- Labels
-