The category 5E Patch Panel is designed for high-density installations and exceeds ANSI/TIA/EIA-568 C.2 standards, accepts 22-26 AWG wires, and features phosphor bronze contacts. Patch panels are 19” horizontal rack mount compatible and are offered in 24, and 48 port configurations with built-in anchoring points for improved cable organization and security. Features color coded ports for universal wiring connections. A 110-type termination provides the most secure and reliable connection to maximize performance. Certified for safety by Underwriters Laboratories.

The category 5E Patch Panel is designed for high-density installations and exceeds ANSI/TIA/EIA-568 C.2 standards, accepts 22-26 AWG wires, and features phosphor bronze contacts. Patch panels are 19” horizontal rack mount compatible and are offered in 24, and 48 port configurations with built-in anchoring points for improved cable organization and security. Features color coded ports for universal wiring connections. A 110-type termination provides the most secure and reliable connection to maximize performance. Certified for safety by Underwriters Laboratories.

Our Power-over-Ethernet (PoE) patch panel is a passive device used to supply power via UTP cables to terminal devices equipped with PoE ports. 10BASE-T and 100BASE-TX networks use only two of the four pairs in the twisted-pair cable, located on pins 1 plus 2 and 3 plus 6. The PoE panel injects supply voltage to the 4 plus 5 (+) and 7 plus 8 (-) pins/wires. The front panel has two rows of RJ-45 ports. The ports marked with numbers on a white background (Data) are standard Ethernet ports (inputs), those with a yellow background (Power+Data) are PoE ports for connecting terminal PoE devices (outputs).

The maximum distance range of supplying PoE devices is 328ft. The actual range depends on the number of connected devices and their power consumption. The transmission range is also limited by the distances from active devices (switches, routers etc.) to the data ports of the device. The recommended transmission medium is twisted-pair cable Cat 5e or higher. Our PoE patch panel can supply power up to 16 PoE devices.

KPS-304

• Diagonal: 120" / 3.05m
• Dimensions: 94.4" x 70.9" / 2.40 x 1.80 m
• Color: White
• Weight: 12.0Kg

Expand your viewing potential!

This projection screen is very easy to use. Just pull it down and when you are done, roll it back up and it will lock automatically! Its white matte finish eliminates both glare and reflections. It may be mounted on the wall or on the ceiling.

General

• Manual Auto-lock screen
• Wall and ceiling mounts
• Available in White or Black Case
• White Matte Screen
• Easy to install
• Easy to use, easy pull down and roll up feature
• Easy to clean
• Screen thickness: 0.42mm +/-0.03

• RF Wireless Connection
• 12,000 dpi Optical Hero Sensor
• Six Programmable Buttons
• 1000Hz Polling Rate
• 1ms Response Time
• Up to 250 Hours of Battery Life
• Onboard Memory
• Mac, Windows, & Chrome OS Compatible

Play your favorite PC games wirelessly with the Logitech G305 LIGHTSPEED Wireless Mouse, thanks to its LIGHTSPEED wireless technology and USB nano receiver. The G305 can last up to 9 months on a single AA battery. It also has a lightweight design with a built-in storage for the USB nano receiver for easy transportation.

With the Hero optical sensor that has a 200 to 12,000 dpi range, the G305 provides precise accuracy, thanks zero smoothing, filtering, or acceleration. The six programmable buttons can be customized with the Logitech Gaming software. You can also save up to five profiles directly to the mouse, thanks to its onboard memory.

Hero Sensor & Onboard Storage
The Hero sensor is an optical sensor with a 200 to 12,000 dpi range. You can also save up to five profiles to the onboard memory so you can take their settings with you while on the go.

LIGHTSPEED Wireless
With LIGHTSPEED and a USB nano receiver, the G403 provides the freedom of a wireless connection and the 1 ms response time required by gamers.

Battery Life
The G305 allows you to game for approximately 250 hours on a single AA battery. There is also an indicator light that reminds you when only 15% of the battery is remaining.

Lightweight
Weighing just 99 grams, the G305 features a lightweight mechanical design.

Six Programmable Buttons
The G305 sports 10 million click switches for the two primary buttons. G305 also has middle click, dpi button, and two side buttons that can be programmed to your preferences via the Logitech gaming software.

Advanced Button Tensioning
Advanced button tensioning with separated buttons enhances the consistency of the left/right mouse buttons and helps reduce the force needed required to click. This results in crisp, reliable click performance you can depend on in intense gaming sessions.

Built-In USB Nano Receiver Storage
The durable, lightweight design with a small footprint and built-in nano receiver storage make G305 a great travel companion.

Compatibility
This mouse is compatible with systems running on Windows 7 or later, macOS 10.11 or later, and Chrome OS.

Wall Pivotable Cabinet – Fully assembled

Nexxt NPC-6U65B 6U Wall Pivotable Cabinet, Fully assembled, 600x550mm

MPN: NPC-P6U65B

Fully assembled dual hinged wallmount enclosure

The Nexxt Solutions welded swing frame wallmount cabinet system is ideal for installations where a full enclosure solution is not required.

This enclosure is made up of heavy-gauge steel and a sturdy mounting frame.

It also features a tempered-glass front door, with lockable access to keep network gear and communication cabling safe and properly organized.

Each enclosure supports optional fans to ensure optimum ventilation inside the unit.

Flexible and versatile, our cabinets come fully assembled for rapid deployment, offering a practical and cost-effective solution for applications requiring protection, structural integrity and cable management capabilities.

No assembly required, the system ships ready to mount to a wall

Hinged cabinet opens away from the wall for ease of equipment Installation

Accessibility from both the front and rear for simplified diagnostic, maintenance and service of devices housed inside the enclosure

Pivoting frame with locking mechanism swings out 180 degrees

Features a fully welded frame construction reinforced with heavy gauge steel, specially designed to support heavy equipment

132lb (60kg) maximum static load capacity and 66lb (30kg) maximum dynamic load capacity

Toolless, reversible glass door installation

Solid and removable side panels

Standard square-punched mounting rails for faster equipment loading

The front door can turn 180 degrees

U-rack units are numbered front and back for easy equipment installation

Finished surface to prevent damage caused by rust and other external factors

Wall Pivotable Cabinet – Fully assembled

Nexxt NPC-9U65B 9U Wall Pivotable Cabinet, Fully assembled, 600x550mm

MPN: NPC-P9U65B

Fully assembled dual hinged wallmount enclosure

The Nexxt Solutions welded swing frame wallmount cabinet system is ideal for installations where a full enclosure solution is not required.

This enclosure is made up of heavy-gauge steel and a sturdy mounting frame.

It also features a tempered-glass front door, with lockable access to keep network gear and communication cabling safe and properly organized.

Each enclosure supports optional fans to ensure optimum ventilation inside the unit.

Flexible and versatile, our cabinets come fully assembled for rapid deployment, offering a practical and cost-effective solution for applications requiring protection, structural integrity and cable management capabilities.

No assembly required, the system ships ready to mount to a wall

Hinged cabinet opens away from the wall for ease of equipment Installation

Accessibility from both the front and rear for simplified diagnostic, maintenance and service of devices housed inside the enclosure

Pivoting frame with locking mechanism swings out 180 degrees

Features a fully welded frame construction reinforced with heavy gauge steel, specially designed to support heavy equipment

132lb (60kg) maximum static load capacity and 66lb (30kg) maximum dynamic load capacity

Toolless, reversible glass door installation

Solid and removable side panels

Standard square-punched mounting rails for faster equipment loading

The front door can turn 180 degrees

U-rack units are numbered front and back for easy equipment installation

Finished surface to prevent damage caused by rust and other external factors

Wall Pivotable Cabinet – Fully assembled

Nexxt NPC-12U65B 12U Wall Pivotable Cabinet, Fully assembled, 600x550mm

MPN: NPC-P12U65B

Fully assembled dual hinged wallmount enclosure

The Nexxt Solutions welded swing frame wallmount cabinet system is ideal for installations where a full enclosure solution is not required.

This enclosure is made up of heavy-gauge steel and a sturdy mounting frame.

It also features a tempered-glass front door, with lockable access to keep network gear and communication cabling safe and properly organized.

Each enclosure supports optional fans to ensure optimum ventilation inside the unit.

Flexible and versatile, our cabinets come fully assembled for rapid deployment, offering a practical and cost-effective solution for applications requiring protection, structural integrity and cable management capabilities.

No assembly required, the system ships ready to mount to a wall

Hinged cabinet opens away from the wall for ease of equipment Installation

Accessibility from both the front and rear for simplified diagnostic, maintenance and service of devices housed inside the enclosure

Pivoting frame with locking mechanism swings out 180 degrees

Features a fully welded frame construction reinforced with heavy gauge steel, specially designed to support heavy equipment

132lb (60kg) maximum static load capacity and 66lb (30kg) maximum dynamic load capacity

Toolless, reversible glass door installation

Solid and removable side panels

Standard square-punched mounting rails for faster equipment loading

The front door can turn 180 degrees

U-rack units are numbered front and back for easy equipment installation

Finished surface to prevent damage caused by rust and other external factors

• Wired USB Connectivity
• 25,600 dpi HERO 25K Optical Sensor
• 13 Programmable Controls
• LIGHTFORCE Optical-Mechanical Switches
• Adjustable, Removable DPI-Shift Button
• Onboard Memory
• Works with Windows & Mac

Experience exceptional responsiveness and precision with the black Logitech G G502 X Gaming Mouse at your side. Taking the original G502 gaming mouse design to the next level, the G502 X introduces LIGHTFORCE hybrid optical-mechanical switches for the main left and right buttons, which provide higher levels of speed and reliability while retaining the feel of mechanical switches. At the same time, the HERO 25K optical sensor delivers pinpoint precision with up to 25,600 dpi of sensitivity. The reversible DPI-shift button located on the thumb rest lets you switch settings on-the-fly to adapt to different situations. Or you can remove the button altogether and replace it with a cover.

With 13 programmable controls and onboard memory for up to five profiles, you can customize this lightweight mouse for different games and applications. Customize your G502 X wired gaming mouse with the Logitech G Hub software for Windows and macOS.

LIGHTFORCE Switches
Hybrid optical-mechanical switch technology provides incredible speed and reliability alongside precise actuation with crisp response.

HERO 25K Gaming Sensor
The sensor is designed to provide sub-micron precision for incredible accuracy with zero smoothing / acceleration / filtering.

Redesigned DPI-Shift Button
This mouse features a reversible and removable DPI-shift button for precise customization depending on your grip and preferences.

Dual-Mode Scroll Wheel
Switch between hyper-fast free-spin and precise ratcheting mode. Tilt the wheel left or right for two additional custom controls.