Zoekresultaten voor 'WA 0821 7001 0763 (MEVVAH) Pvc Wall Panel Marmer Tlogosari Kabupaten Bondowoso Jawa Timur'

Wall Pivotable Cabinet – Fully assembled

Nexxt NPC-6U65B 6U Wall Pivotable Cabinet, Fully assembled, 600x550mm

MPN: NPC-P6U65B

Fully assembled dual hinged wallmount enclosure

The Nexxt Solutions welded swing frame wallmount cabinet system is ideal for installations where a full enclosure solution is not required.

This enclosure is made up of heavy-gauge steel and a sturdy mounting frame.

It also features a tempered-glass front door, with lockable access to keep network gear and communication cabling safe and properly organized.

Each enclosure supports optional fans to ensure optimum ventilation inside the unit.

Flexible and versatile, our cabinets come fully assembled for rapid deployment, offering a practical and cost-effective solution for applications requiring protection, structural integrity and cable management capabilities.

No assembly required, the system ships ready to mount to a wall

Hinged cabinet opens away from the wall for ease of equipment Installation

Accessibility from both the front and rear for simplified diagnostic, maintenance and service of devices housed inside the enclosure

Pivoting frame with locking mechanism swings out 180 degrees

Features a fully welded frame construction reinforced with heavy gauge steel, specially designed to support heavy equipment

132lb (60kg) maximum static load capacity and 66lb (30kg) maximum dynamic load capacity

Toolless, reversible glass door installation

Solid and removable side panels

Standard square-punched mounting rails for faster equipment loading

The front door can turn 180 degrees

U-rack units are numbered front and back for easy equipment installation

Finished surface to prevent damage caused by rust and other external factors

Nexxt Solutions semi-knocked down (SKD) fixed wall mount enclosures are ideal for installations were space is limited or where a full cabinet is not required. Our wall mount enclosures are the perfect solution for any 19-inch installation. Commonly used with all patch panels and cable management panels to give installations an organized, protected and professional appearance. These wall mount enclosures come as semi-knock down version. Available with 4, 6, 9, 12, 15 and 18 rack spaces.

• Available to accommodate EIA industry-standard 19-inch panels
• Follows ANSI/TIA/EIA-568 C.2 manufacturing standards and meets ANSI/EIA RS-310-D. It also complies with IEC297-2; DIN41491: PART1; DIN41494: PART7; GB/T3047.2-92 standard
• Single section structure, the turning angle of front door is above 180 degree 19-inch standard installation provides easy access for management and maintenance
• One layer of electrostatic coating protects it against humidity, rust, scratches, peeling, strong acid and alkaline erosion
• Black epoxy-polyester hybrid powder paint
• For indoor use only, in environmentally controlled areas, may not be used outdoors, in industrial or harsh environments or in plenum spaces
• Use with shelves or rails to support small modular network or voice switches routers and other network equipment
• Universal horizontal cable manager
• Horizontal power strips can be fit
• Front glass door and side panels with key lock sets
• Pathway for routing cables located on the top and bottom panels
• Adjustable vertical rails
• Attached grounding bolts
• Protection grade: IP20
• Max load: 132lb

Our Power-over-Ethernet (PoE) patch panel is a passive device used to supply power via UTP cables to terminal devices equipped with PoE ports. 10BASE-T and 100BASE-TX networks use only two of the four pairs in the twisted-pair cable, located on pins 1 plus 2 and 3 plus 6. The PoE panel injects supply voltage to the 4 plus 5 (+) and 7 plus 8 (-) pins/wires. The front panel has two rows of RJ-45 ports. The ports marked with numbers on a white background (Data) are standard Ethernet ports (inputs), those with a yellow background (Power+Data) are PoE ports for connecting terminal PoE devices (outputs).

The maximum distance range of supplying PoE devices is 328ft. The actual range depends on the number of connected devices and their power consumption. The transmission range is also limited by the distances from active devices (switches, routers etc.) to the data ports of the device. The recommended transmission medium is twisted-pair cable Cat 5e or higher. Our PoE patch panel can supply power up to 16 PoE devices.

The category 5E Patch Panel is designed for high-density installations and exceeds ANSI/TIA/EIA-568 C.2 standards, accepts 22-26 AWG wires, and features phosphor bronze contacts. Patch panels are 19” horizontal rack mount compatible and are offered in 24, and 48 port configurations with built-in anchoring points for improved cable organization and security. Features color coded ports for universal wiring connections. A 110-type termination provides the most secure and reliable connection to maximize performance. Certified for safety by Underwriters Laboratories.