Patch Cabinets

Nexxt - SKD Floor Telecom Cabinet

Wall Pivotable Cabinet – Fully assembled

Nexxt NPC-9U65B 9U Wall Pivotable Cabinet, Fully assembled, 600x550mm

MPN: NPC-P9U65B

Fully assembled dual hinged wallmount enclosure

The Nexxt Solutions welded swing frame wallmount cabinet system is ideal for installations where a full enclosure solution is not required.

This enclosure is made up of heavy-gauge steel and a sturdy mounting frame.

It also features a tempered-glass front door, with lockable access to keep network gear and communication cabling safe and properly organized.

Each enclosure supports optional fans to ensure optimum ventilation inside the unit.

Flexible and versatile, our cabinets come fully assembled for rapid deployment, offering a practical and cost-effective solution for applications requiring protection, structural integrity and cable management capabilities.

No assembly required, the system ships ready to mount to a wall

Hinged cabinet opens away from the wall for ease of equipment Installation

Accessibility from both the front and rear for simplified diagnostic, maintenance and service of devices housed inside the enclosure

Pivoting frame with locking mechanism swings out 180 degrees

Features a fully welded frame construction reinforced with heavy gauge steel, specially designed to support heavy equipment

132lb (60kg) maximum static load capacity and 66lb (30kg) maximum dynamic load capacity

Toolless, reversible glass door installation

Solid and removable side panels

Standard square-punched mounting rails for faster equipment loading

The front door can turn 180 degrees

U-rack units are numbered front and back for easy equipment installation

Finished surface to prevent damage caused by rust and other external factors

Nexxt Solutions semi-knocked down (SKD) fixed wall mount enclosures are ideal for installations were space is limited or where a full cabinet is not required. Our wall mount enclosures are the perfect solution for any 19-inch installation. Commonly used with all patch panels and cable management panels to give installations an organized, protected and professional appearance. These wall mount enclosures come as semi-knock down version. Available with 4, 6, 9, 12, 15 and 18 rack spaces.

• Available to accommodate EIA industry-standard 19-inch panels
• Follows ANSI/TIA/EIA-568 C.2 manufacturing standards and meets ANSI/EIA RS-310-D. It also complies with IEC297-2; DIN41491: PART1; DIN41494: PART7; GB/T3047.2-92 standard
• Single section structure, the turning angle of front door is above 180 degree
• 19-inch standard installation provides easy access for management and maintenance
• One layer of electrostatic coating protects it against humidity, rust, scratches, peeling, strong acid and alkaline erosion.
• Black epoxy-polyester hybrid powder paint.
• For indoor use only, in environmentally controlled areas, may not be used outdoors, in industrial or harsh environments or in plenum spaces.
• Use with shelves or rails to support small modular network or voice switches routers and other network equipment
• Universal horizontal cable manager
• Horizontal power strips can be fit
• Front glass door and side panels with key lock sets
• Pathway for routing cables located on the top and bottom panels
• Adjustable vertical rails
• Attached grounding bolts
• Protection grade: IP20
• Max load: 132lb

Nexxt Solutions semi-knocked down (SKD) hinged wall mount enclosures are ideal for installations were space is limited or where a full cabinet is not required. Our wall mount enclosures are the perfect solution for any 19-inch installation. Commonly used with all patch panels and cable management panels to give installations an organized, protected and professional appearance. These wall mount enclosures come as semi-knock down version. Available with 6, 9, 12, 15 and 18 rack spaces.

• Follows ANSI/TIA/EIA-568 C.2 manufacturing standards and meets ANSI/EIA RS-310-D. It also complies with IEC297-2; DIN41491: PART1; DIN41494: PART7; GB/T3047.2-92 standard
• Two section structure, the main body can turn 120 degree, the turning angle of front door is above 180 degree
• Compact welded frame design, featuring perforated top panel for ventilation
• 19-inch standard installation provides easy access for management and maintenance
• One layer of electrostatic coating protects it against humidity, rust, scratches, peeling, strong acid and alkaline erosion
• For indoor use only, in environmentally controlled areas, may not be used outdoors, in industrial or harsh environments or in plenum spaces
• Use with shelves or rails to support small modular network or voice switches routers and other network equipment

Nexxt - SKD Floor Telecom Cabinet

Startech 12U 36in Knock-Down Server Rack Cabinet with Casters RK1236BKF Rack Stands & Cabinets