Solution type

• Gaming
• Home
• Corporate

Applications

• Gaming consoles
• Computers & accessories
• Televisions 19-80"
• Audio systems
• Video surveillance
• Small servers

Interactive topology
Interactive UPS offer a cost effective solution with low energy consumption ratings, extending the overall life cycle of batteries. Voltage regulation is accomplished without switching to battery mode.

Battery backup
Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.

Automatic voltage regulation (AVR)
Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages without tapping into the reserved battery power when irregularities are present on the main utility line.

Automatic shut-off
Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.

Surge protection, overload protection, electric discharge and voltage protection
Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment. Extends battery life by preventing system overloads and controlling charging currents.

Resettable circuit breaker
Automatically prevents the flow of electricity in an electric circuit as a safety measure upon detecting undesirable high voltage levels. Can be reset to resume operation.

MOV Technology
Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.

Thermofuse protection
Instantly disconnects the power when internal temperatures become dangerously high.

Power filters
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery self-test
Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.

Audible alarm
Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.

Flame retardant material
All of our products are constructed with fire retardant ABS material, guaranteeing that if any failures are present, the equipment will not go up in flames.

Cold start function
Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.

Data line protection
Built-in data line protection prevents power surges that travel through telephone or Ethernet lines from causing damage to sensitive electronics.

Status LCD
Displays live status of the UPS with detailed information on battery and power conditions, alerting users to potential problems before they can affect equipment and cause costly downtime.

Communication ports
USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard interface.

Forza tracker management software
Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate detection and correction of any operation issues with minimal or no delay.

UL tested
Tested to UL1778 standards for electrical safety and compliance. Recognized by global laboratories.

Simple battery replacement
Avoid tedious battery access thanks to our convenient design. Makes the replacement of batteries fast and easy, reducing average times to service the units.

Transformer block spacing
Specifically designed for flexible deployment, aimed to accommodate various sized adapters and large wall plugged power transformers.

USB Charging ports
Equipped with reliable surge protection and latest USB charging capabilities for your tablet, smartphone and other portable electronic devices.

Coaxial protection
Helps protect sensitive and mission critical surveillance equipment from damage due to potential overvoltage and electrostatic discharges on coaxial transmission lines.

Ventilation system
Rear mounted extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.

Energy Star
Certified energy-efficient product that offer savings on energy bills without sacrificing performance, features, and comfort.

Pure Sinewave
Power equal to that generated by the utility company, guaranteed to produce a cleaner output for sensitive equipment, improving overall performnace and efficiency.

• Output: 1350 VA / 810W
• Input: 120 VAC @ 60 Hz ± 3 Hz
• 10 x Total NEMA5-15R Outlets
• 5 x Battery Backup & Surge Outlets

The new SL series of Forza intelligent UPS systems has been redesigned with an innovative LCD touch screen, characterized by an easy-to-read user interface and real-time display of energy levels. The SL series, which has UL certification, is the total solution for both public and private institutions in the educational, financial and government sectors. This series has positioned itself at the forefront of its class by integrating voltage regulation, surge suppression and backup functions, all in one unit. The UPS includes the ForzaTracker monitoring software for easy system administration directly from your computer, through a USB communication port. With extended autonomy times on par with optimal electrical protection,

• Capacity: 800VA / 480W
• Topology: Interactive
• Waveform: Simulated sine wave
• Voltage: 120V
• Input Type: NEMA 5-15P
• Output Type: 6 x NEMA 5-15R
• Communication: USB
• Visual indicator: Status LCD touch screen
• Management Software: Forza Tracker

Interactive topology
The interactive UPS is a cost-effective solution characterized by low power consumption and by increasing battery life cycles. The voltage regulation is carried out without having to go to battery mode.

Backup battery
Provides backup power from the battery during voltage drops, thus preventing the loss of critical information while minimizing the effects of a forced disconnection. Accumulate enough energy to shut down equipment properly.

Automatic voltage regulation (AVR)
Supplies pure and stable alternating current by automatically increasing low voltage during voltage drops and decreasing overvoltage without using battery backup power when irregularities occur in the power supply line.

Automatic
shutdown Produces automatic shutdown when the voltage levels are too high or too low in order to protect your equipment against potentially harmful fluctuations and other irregularities in the power supply.

Pulse protection, overload protection, discharge and voltage protection
Divert excess voltage from secondary equipment during overloads or power surges without reducing battery power to keep primary critical equipment running. Extends battery life by avoiding system overloads and controlling charging currents.

Resettable circuit breaker
Automatically prevents current flow in an electrical circuit as a safety measure by detecting inappropriate high voltage levels. It can be reconfigured to resume operation.

MOV
technology MOV (metal oxide varistor) technology offers greater protection for electronic components against overloads and sudden power surges.

Hot melt protection
Disconnects power instantly when the internal temperature rises to potentially harmful levels.

Power filters
Its function is to block unwanted noise by reducing electromagnetic interference (EMI) and radio frequency (RFI), in order to supply pure and undistorted electricity to all outlets.

Intelligent battery management
Maximizes battery operation, life and reliability through intelligent and accurate charging.

Battery Self Check
Generates early failure notifications about spent or depleted batteries for immediate replacement, in order to prevent any unforeseen events related to backup power.

Audible alarm
Provides an audible notification when changing the network supply and power conditions of the UPS when the unit is installed in hard-to-reach places or where the user cannot easily see it.

Flame retardant material
All our UPS systems are made with flame retardant ABS material, which guarantees that if there is a fault, the equipment is not susceptible to igniting fire.

Option of “cold start”
Temporary reserve of energy destined to start the UPS in battery mode during power outages. Restores emergency power to charges as soon as new batteries are installed.

Data line
protection Integrated data line protection prevents overvoltages from circulating through the telephone and ethernet line potentially harmful to sensitive electronic devices.

Silent
design Our fanless design on par with an exceptional cooling structure is the ideal solution for quiet environments with less noise and interference than internal component movement generates.

Status
LCD touch screen State- of-the-art touch screen alternates between the different modes of the UPS in real time with detailed information on the power conditions and battery status, alerting users of potential problems before they can affect the equipment and cause expensive periods of inactivity.

Communication ports
The USB port allows automatic disconnection, by safely shutting down the connected computers to prevent the loss of important data. Manage and monitor the UPS remotely with the simple console interface included in the system.

ForzaTracker monitoring software
Allows the control and monitoring of several units through a network connection. The software prevents the loss of data due to interruptions in the power supply by correctly disconnecting the devices connected to the UPS, which also allows the prompt detection of failures and their corresponding correction almost immediately.

With UL verification
Complies with UL1778 electrical safety standards. Recognized by laboratories worldwide.

The new SL series of Forza intelligent UPS systems has been redesigned with an innovative LCD touch screen, characterized by an easy-to-read user interface and real-time display of energy levels. The SL series, which has UL certification, is the total solution for both public and private institutions in the educational, financial and government sectors. This series has positioned itself at the forefront of its class by integrating voltage regulation, surge suppression and backup functions, all in one unit. The UPS includes the ForzaTracker monitoring software for easy system administration directly from your computer, through a USB communication port. With extended autonomy times on par with optimal electrical protection,

• Capacity: 600VA / 360W
• Topology: Interactive
• Waveform: Simulated sine wave
• Voltage: 120V
• Input Type: NEMA 5-15P
• Output Type: 6 x NEMA 5-15R
• Communication: USB
• Visual indicator: Status LCD touch screen
• Management Software: Forza Tracker

Interactive topology
The interactive UPS is a cost-effective solution characterized by low power consumption and by increasing battery life cycles. The voltage regulation is carried out without having to go to battery mode.

Backup battery
Provides backup power from the battery during voltage drops, thus preventing the loss of critical information while minimizing the effects of a forced disconnection. Accumulate enough energy to shut down equipment properly.

Automatic voltage regulation (AVR)
Supplies pure and stable alternating current by automatically increasing low voltage during voltage drops and decreasing overvoltage without using battery backup power when irregularities occur in the power supply line.

Automatic
shutdown Produces automatic shutdown when the voltage levels are too high or too low in order to protect your equipment against potentially harmful fluctuations and other irregularities in the power supply.

Pulse protection, overload protection, discharge and voltage protection
Divert excess voltage from secondary equipment during overloads or power surges without reducing battery power to keep primary critical equipment running. Extends battery life by avoiding system overloads and controlling charging currents.

Resettable circuit breaker
Automatically prevents current flow in an electrical circuit as a safety measure by detecting inappropriate high voltage levels. It can be reconfigured to resume operation.

MOV
technology MOV (metal oxide varistor) technology offers greater protection for electronic components against overloads and sudden power surges.

Hot melt protection
Disconnects power instantly when the internal temperature rises to potentially harmful levels.

Power filters
Its function is to block unwanted noise by reducing electromagnetic interference (EMI) and radio frequency (RFI), in order to supply pure and undistorted electricity to all outlets.

Intelligent battery management
Maximizes battery operation, life and reliability through intelligent and accurate charging.

Battery Self Check
Generates early failure notifications about spent or depleted batteries for immediate replacement, in order to prevent any unforeseen events related to backup power.

Audible alarm
Provides an audible notification when changing the network supply and power conditions of the UPS when the unit is installed in hard-to-reach places or where the user cannot easily see it.

Flame retardant material
All our UPS systems are made with flame retardant ABS material, which guarantees that if there is a fault, the equipment is not susceptible to igniting fire.

Option of “cold start”
Temporary reserve of energy destined to start the UPS in battery mode during power outages. Restores emergency power to charges as soon as new batteries are installed.

Data line
protection Integrated data line protection prevents overvoltages from circulating through the telephone and ethernet line potentially harmful to sensitive electronic devices.

Silent
design Our fanless design on par with an exceptional cooling structure is the ideal solution for quiet environments with less noise and interference than internal component movement generates.

Status
LCD touch screen State- of-the-art touch screen alternates between the different modes of the UPS in real time with detailed information on the power conditions and battery status, alerting users of potential problems before they can affect the equipment and cause expensive periods of inactivity.

Communication ports
The USB port allows automatic disconnection, by safely shutting down the connected computers to prevent the loss of important data. Manage and monitor the UPS remotely with the simple console interface included in the system.

ForzaTracker monitoring software
Allows the control and monitoring of several units through a network connection. The software prevents the loss of data due to interruptions in the power supply by correctly disconnecting the devices connected to the UPS, which also allows the prompt detection of failures and their corresponding correction almost immediately.

With UL verification
Complies with UL1778 electrical safety standards. Recognized by laboratories worldwide.

Back UPS Pro BX 850VA, 8 Outlets, AVR, LCD interface, LAM 60Hz

The new Atlas online series provides true double-conversion technology and the highest level of protection suitable for critical equipment. This series combine an optimized level of performance with rich functionality, resulting in a highly efficient system that is easy to maintain and operate. Designed to prevent unexpected service interruptions due to overloads, internal fault conditions or during blackouts, the UPS ensures reliable and continuous operation through its internal battery pack and an optional external battery module.Ideal for high density power protection demands, the Atlas features aversatile rack/tower form factor to fit diverse environments. Despite its compact footprint, this UPS incorporates internal battery packs which can be accessed via the front panel for maintenance checks and replacement without removing the UPS from its mounting rack. The LCD display panel can be easily shifted by pressing buttons to suit the installation format, vertically when mounted on a stand or horizontally if installed in arack. Besides, IT personnel can manage equipment well from learning remaining backup time information via LCD display.

Online double conversion topology
Online UPS with true double-conversion technology offer the highest level of protection suitable for mission critical equipment by isolating the connected loads from raw utility power. This system works by converting power from AC to DC and then back to AC thanks to its two stage inverter and rectifier design.

Battery backup
Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.

Automatic voltage regulation (AVR)
Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages when irregularities are present on the main utility line.

Automatic shut-off
Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.

Surge protection, overload protection, electric discharge and voltage protection
Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment. Extends battery life by preventing system overloads and controlling charging currents.

MOV Technology
Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.

Thermofuse protection
Instantly disconnects the power when internal temperatures become dangerously high.

Power filters
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery self-test
Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.

Active power factor correction
Counteracts harmonic distortion by modifying the power factor of the UPS in order to maximize the use of the electrical power from the main utility line.

Audible alarm
Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.

Cold start function
Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.

Data line protection
Built-in data line protection prevents power surges that travel through telephone or Ethernet lines from causing damage to sensitive electronics.

Status LCD
Displays live status of the UPS with detailed information on battery and power conditions, alerting users to potential problems before they can affect equipment and cause costly downtime.

Communication ports
USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard interface.

Forza tracker management software
Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate detection and correction of any operation issues with minimal or no delay.

UL certified
UL certified for electrical safety and compliance. Recognized by global laboratories.

Inverter and generator compatible
Engineered to properly work with frequency variations caused by emergency inverters and backup generators in areas with severe electrical fluctuations.

Ventilation system
Extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.

Metal housing
Heavy-duty, impact-resistant metal construction

ECO Mode
Environmentally friendly mode which reduces energy consumption and improves overall efficiency by minimizing the waste of energy.

High efficiency
Power factor ratio designed to maximize the use of in line electric power by improving power distribution to the connected loads

Emergency power-off EPO
Instantly shuts down the UPS and any connected equipment in the event of an emergency without the use of software.

Optional battery bank
Increase the overall runtime of the UPS system, allowing users to maximize their current requirements without the roadblock of having to discard and upgrade to a new product down the line.

Intelligent card slot
Used to add an optional SNMP communication card for real-time monitoring and alerts of the UPS across a network.