Power Devices
-
APC BX1350M-LM60 Battery Back UPS PRO 1350VA 120VSKU: APC BX1350M-LM60 Battery Back UPS PRO 1350VA 120VUS$ 265,00
- Output: 1350 VA / 810W
- Input: 120 VAC @ 60 Hz ± 3 Hz
- 10 x Total NEMA5-15R Outlets
- 5 x Battery Backup & Surge Outlets
Meer InformatieDesigned for electronics in your home or office, such as computers and related equipment, network devices (modem/router), POS devices, CCTV circuits, televisions, video game consoles, and more, the Battery Back-UPS Pro BX1350M from APC helps protect against surges, spikes, lightning, and outages. In the case of a power outage, it can provide up to 2.5 minutes of runtime at max load, 10.1 minutes at half load, and 287 minutes at 10W. It also provides an output capacity of 1350 VA / 810W, ten total NEMA5-15R outlets (five battery backup & surge and five surge-only), an input voltage of 120 VAC at 60 Hz ± 3 Hz using its 6' cord with a NEMA 5-15 plug, a surge energy rating of 789 joules, and 1Gb of dataline protection. Its sealed, lead-acid, battery is maintenance-free and can be replaced using an APCRBC123 replacement battery. The BX1350M outputs 98 to 139 VAC at 60 Hz ± 1 Hz (on utility) and 115 VAC ± 8% at 60 Hz ± 1 Hz (on battery).
For areas for inconsistent power grids, Automatic Voltage Regulation (AVR) helps provide stability against voltage fluctuations, overvoltages, and brownouts. This UPS has an integrated LCD display that shows information on the utility and system status, and PowerChute Personal Edition software can help track power quality, configure alarms, and shut down your computer during an outage.
When compared to the previous generation of APC's Back-UPS systems, this model features a more compact design with a smaller footprint, surge protection improvements, and improved 1Gb dataline protection. Also featured is a limited lifetime data-recovery warranty and a limited 3-year warranty for the APC unit.
Product Improvements
- Smaller Footprint
- Improved Dataline Protection (1Gb)
- Surge Protection Improvements
LCD (Liquid Crystal Display)
- Provides information about the utility and UPS conditions:
- Input Power (On Battery/On Utility)
- Input Voltage
- Output Voltage
- Output Frequency
- Load (Watts, % of Capacity, Graphic Display)
- Overload
- AVR Working
- System Fault
- Replace Battery
- Battery Charge Status (Graphic Display)
- Estimated Runtime
- Power Saving Mode (Enabled/Disabled)
- Mute (Enabled/Disabled) Number of Power Events
1Gb Network Dataline Protection
- Hot-Swappable Batteries: Help ensure clean and uninterrupted power to protect equipment while batteries are being replaced.
- User-Replaceable Batteries: Increase availability by allowing a trained user to perform upgrades and replacements of the batteries, reducing the time needed for repairs.
- Battery Backup & Surge-Protected Outlets: Keep devices running when the power goes out or fluctuates beyond safe levels.
- Surge-Only Outlets: Protect electronics without reducing battery capacity.
- Push-Button Circuit Breaker: Allow quick recovery from overloads and eliminate the need for fuse replacement.
- APFC Power Cord Compatibility: Compatible with personal computers that have an Active-PFC power supply.
- USB Communication Port: For the management of shutdowns via PowerChute Personal Edition.
PowerChute Personal Edition
- PowerChute software provides additional power protection and management features for Back-UPS Pro users, safeguarding files and programs.
- Readout of the current power conditions
- Displays daily energy consumption and cost of powering your equipment
- Saves money by allowing you to choose an energy management plan that fits your needs
- Prevents data corruption by saving files and shutting down your system during extended power outages or low battery conditions
- Monitors the system and logs utility power problems and battery conditions
- Allows you to configure Back-UPS options like voltage transfer settings, silence alarms during night hours, shutdown parameters, energy management features, and more
- User-friendly installation takes the guesswork out of configuration for first-time users with a help feature (USB and serial interface)
Automatic Voltage Regulation (AVR)
Corrects voltage fluctuations, saving your battery power for blackouts.Automatic Diagnostic Testing
Helps ensure your unit is ready when needed.ENERGY STAR
This label helps ensure that products are independently certified as energy efficient, which save money year after year. -
Forza XG-1201LCD Smart-UPS PSW 1200VASKU: XG-1201LCDUS$ 285,00
Solution type
- Gaming
- Home
- Corporate
Applications
- Gaming consoles
- Computers & accessories
- Televisions 19-80"
- Audio systems
- Video surveillance
- Small servers
Interactive topology
Interactive UPS offer a cost effective solution with low energy consumption ratings, extending the overall life cycle of batteries. Voltage regulation is accomplished without switching to battery mode.Battery backup
Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.Automatic voltage regulation (AVR)
Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages without tapping into the reserved battery power when irregularities are present on the main utility line.Automatic shut-off
Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.Surge protection, overload protection, electric discharge and voltage protection
Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment. Extends battery life by preventing system overloads and controlling charging currents.Resettable circuit breaker
Automatically prevents the flow of electricity in an electric circuit as a safety measure upon detecting undesirable high voltage levels. Can be reset to resume operation.MOV Technology
Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.Thermofuse protection
Instantly disconnects the power when internal temperatures become dangerously high.Power filters
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.Battery self-test
Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.Audible alarm
Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.Flame retardant material
All of our products are constructed with fire retardant ABS material, guaranteeing that if any failures are present, the equipment will not go up in flames.Cold start function
Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.Data line protection
Built-in data line protection prevents power surges that travel through telephone or Ethernet lines from causing damage to sensitive electronics.Status LCD
Displays live status of the UPS with detailed information on battery and power conditions, alerting users to potential problems before they can affect equipment and cause costly downtime.Communication ports
USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard interface.Forza tracker management software
Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate detection and correction of any operation issues with minimal or no delay.UL tested
Tested to UL1778 standards for electrical safety and compliance. Recognized by global laboratories.Simple battery replacement
Avoid tedious battery access thanks to our convenient design. Makes the replacement of batteries fast and easy, reducing average times to service the units.Transformer block spacing
Specifically designed for flexible deployment, aimed to accommodate various sized adapters and large wall plugged power transformers.USB Charging ports
Equipped with reliable surge protection and latest USB charging capabilities for your tablet, smartphone and other portable electronic devices.Coaxial protection
Helps protect sensitive and mission critical surveillance equipment from damage due to potential overvoltage and electrostatic discharges on coaxial transmission lines.Ventilation system
Rear mounted extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.Energy Star
Certified energy-efficient product that offer savings on energy bills without sacrificing performance, features, and comfort.Pure Sinewave
Meer Informatie
Power equal to that generated by the utility company, guaranteed to produce a cleaner output for sensitive equipment, improving overall performnace and efficiency. -
ORIGIN ORS5 APC BGE90M Replacement Battery 12V 6.5AMPSKU: ORIGINORS5US$ 38,00
The APC BGE90M battery kit consists of one (1) 12v 6ah sealed lead-acid batteries that match the OEM BGE90M battery specifications.
The APC BGE90M Battery Replacement Kit Includes:- One (1) 12v 6amp hour SLA UPS batteries
- Dimensions: (LxWxH) 5.94" x 2.01" x 3.84"
The APC BGE90M battery replacement kit is shipped fully charged and tested to ensure you the highest quality possible and comes standard with High-Tech Battery Solution's unbeatable two-year no-hassle warranty. All sealed lead acid batteries purchased from High-Tech Battery Solutions are designed specifically for the deep-cycle stand by use associated with all APC battery backup systems. Our batteries are of the highest quality on the market and are guaranteed to perform to or surpass OEM specifications.
Meer Informatie