Features

• On-line double conversion (VFI) technology from 1000VA to 3000VA with 0.9 power factor.


• Easy installation and maintenance due to easily user-replaceable battery.


• Low cost of ownership: high VFI efficiency and ECO functionality minimize energy consumption.


• High range expandability.


• Intuitive monitoring software, free downloadable and compatible with major operating systems, for: function control, diagnostics, controlled shutdown of loads in case of power failure.


• High capacity for overload management.


• Output mode with constant voltage and frequency (CVCF) to ensure maximum protection of particularly sensitive loads (e.g., electromedical equipment).


• Wide input voltage and frequency ranges that reduce battery tripping while increasing expected battery life and efficiency.


• Ability to set the battery power reserve percentage from 3 to 100% of available capacity.


• Display of accurate calculation of remaining range on the display.


• Two separately programmable IEC socket groups.


• Possibility of starting in the absence of the grid (cold start).


• Firmware easily upgraded to implement new functions.


• EPO and On/Off even remotely.


• RS232 and USB port, slot for additional communication card.


• CEI 0-16 compliant.


• Supplied with input and output power cables.

Main options:

• Boards: RS485, SNMP/web and dry contact relay board to send UPS status to various systems e.g., BMS, PLC, SCADA and AS400.


• External manual bypass with additional sockets.


• External battery cabinets.

Battery management:

• Set battery discharge limit level (3-100%) via included software.


• The UPS shuts down when the set battery power reserve level is reached.


• The UPS will be able to be turned back on manually even when there is no power.