UPS

• Output: 1000W / 1440 VA
• Input: 120V at 50/60 Hz ±3 Hz
• 6 x NEMA 5-15R Battery Backup Outlets
• NEMA 5-15P Input Connection (8' Cord)
• 680-Joule Surge Energy Rating
• Recharge Time: Up to 3 Hours
• Line Interactive Topology
• Sine Waveform
• Cold-Start Capable

For our home and small office customers APC by Schneider Electric delivers a new category of UPSs designed for the essential power protection needs even in the most unstable power conditions. APC Easy UPS Single Phase BV Series is a versatile UPS developed to handle inconsistent power conditions while also delivering the quality millions of IT professionals trust around the world. 

Flexible design for both high and low powered devices

Capable of powering low power devices such as your modem, router, or VOIP as well as high power devices such as PCs, and gaming consoles.

Stay connected for hours, not minutes

Power your home router and/or modem allowing you to maintain your internet connection after safely shutting down your PC or other high-power devices. 

• Output power capacity: 450Watts / 800VA
• Max Configurable Power (Watts): 450Watts / 800VA
• Nominal Output Voltage: 230V
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (4) Schuko CEE 7 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input 

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Input Connections: Schuko CEE 7/7P
• Cord Length: 1.52meters
• Number of Power Cords: 1
• Batteries & Runtime:
• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Expected Battery Life (years): 3 - 5
  
• Efficiency: View Efficiency Graph

BACK-UPS FEATURES & BENEFITS

Online double conversion topology
Online UPS with true double-conversion technology offer the highest level of protection suitable for mission critical equipment by isolating the connected loads from raw utility power. This system works by converting power from AC to DC and then back to AC thanks to its two stage inverter and rectifier design.

Battery backup 
Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.

Automatic voltage regulation 
Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages when irregularities are present on the main utility line.

Automatic shut-off 
Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.

Surge protection, overload protection, electric discharge and voltage protection 
Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment. Extends battery life by preventing system overloads and controlling charging currents.

MOV Technology 
Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.

Thermofuse protection
Instantly disconnects the power when internal temperatures become dangerously high.

Power filters 
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

Intelligent battery management
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

Battery self-test 
Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.

Active power factor correction 
Counteracts harmonic distortion by modifying the power factor of the UPS in order to maximize the use of the electrical power from the main utility line.

Audible alarm 
Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.

Cold start function
Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.

LED visual indicators
Simplified monitoring. LEDs display the real-time status and working mode of power protection equipment.

Communication ports 
USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard interface.

Forza tracker management software
Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate detection and correction of any operation issues with minimal or no delay.

UL certified 
UL certified for electrical safety and compliance. Recognized by global laboratories.

Inverter and generator compatible
Engineered to properly work with frequency variations caused by emergency inverters and backup generators in areas with severe electrical fluctuations.

Ventilation system 
Extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.

Metal housing Metal housing
Heavy-duty, impact-resistant metal construction

ECO Mode 
Environmentally friendly mode which reduces energy consumption and improves overall efficiency by minimizing the waste of energy.

High efficiency 
Power factor ratio designed to maximize the use of in line electric power by improving power distribution to the connected loads

Emergency power-off EPO 
Instantly shuts down the UPS and any connected equipment in the event of an emergency without the use of software.

Intelligent card slot Used to add an optional SNMP communication card for real-time monitoring and alerts of the UPS across a network.

APC's BVX900L-LM UPS provides a rated power of 900VA/480W with electrical protection for unstable power conditions, ensuring constant and reliable connectivity at the most critical times. It features 6 NEMA 5-15R outlets of which 3 outlets provide plenty of runtime for network equipment and other critical energy efficient devices when you need it.

• Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery
• Protect equipment with input transformer blocks without blocking access to other receptacles
• Provides temporary battery power when the utility power is out
• Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home decor.

Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Reserves electrical capacity and runtime for connected equipment requiring battery back-up and provides only overcurrent protection for less important equipment.

• On-line LED status display: battery active: battery replacement and overcharge indicators overcharge.
• Multifunctional lcd status and control console.