The new Atlas online series provides true double-conversion technology and the highest level of protection suitable for critical equipment. This series combine an optimized level of performance with rich functionality, resulting in a highly efficient system that is easy to maintain and operate. Designed to prevent unexpected service interruptions due to overloads, internal fault conditions or during blackouts, the UPS ensures reliable and continuous operation through its internal battery pack and an optional external battery module.Ideal for high density power protection demands, the Atlas features aversatile rack/tower form factor to fit diverse environments. Despite its compact footprint, this UPS incorporates internal battery packs which can be accessed via the front panel for maintenance checks and replacement without removing the UPS from its mounting rack. The LCD display panel can be easily shifted by pressing buttons to suit the installation format, vertically when mounted on a stand or horizontally if installed in arack. Besides, IT personnel can manage equipment well from learning remaining backup time information via LCD display.

Online double conversion topology
Online UPS with true double-conversion technology offer the highest level of protection suitable for mission critical equipment by isolating the connected loads from raw utility power. This system works by converting power from AC to DC and then back to AC thanks to its two stage inverter and rectifier design.

Battery backup
Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.

Automatic voltage regulation (AVR)
Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages when irregularities are present on the main utility line.

Automatic shut-off
Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.

Surge protection, overload protection, electric discharge and voltage protection
Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment. Extends battery life by preventing system overloads and controlling charging currents.

MOV Technology
Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.

Thermofuse protection
Instantly disconnects the power when internal temperatures become dangerously high.

Power filters
Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery self-test
Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.

Active power factor correction
Counteracts harmonic distortion by modifying the power factor of the UPS in order to maximize the use of the electrical power from the main utility line.

Audible alarm
Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.

Cold start function
Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.

Data line protection
Built-in data line protection prevents power surges that travel through telephone or Ethernet lines from causing damage to sensitive electronics.

Status LCD
Displays live status of the UPS with detailed information on battery and power conditions, alerting users to potential problems before they can affect equipment and cause costly downtime.

Communication ports
USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard interface.

Forza tracker management software
Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate detection and correction of any operation issues with minimal or no delay.

UL certified
UL certified for electrical safety and compliance. Recognized by global laboratories.

Inverter and generator compatible
Engineered to properly work with frequency variations caused by emergency inverters and backup generators in areas with severe electrical fluctuations.

Ventilation system
Extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.

Metal housing
Heavy-duty, impact-resistant metal construction

ECO Mode
Environmentally friendly mode which reduces energy consumption and improves overall efficiency by minimizing the waste of energy.

High efficiency
Power factor ratio designed to maximize the use of in line electric power by improving power distribution to the connected loads

Emergency power-off EPO
Instantly shuts down the UPS and any connected equipment in the event of an emergency without the use of software.

Optional battery bank
Increase the overall runtime of the UPS system, allowing users to maximize their current requirements without the roadblock of having to discard and upgrade to a new product down the line.

Intelligent card slot
Used to add an optional SNMP communication card for real-time monitoring and alerts of the UPS across a network.

Four full battery backup outlets

7 min backup time

500VA/250W

NEMA 5-15 outlets

Capacity: 500VA/250W

Input

• Nominal voltage: 115V
• Voltage range: 75-144VAC
• Frequency: 50/60Hz (autosensing)
• AC plug style: NEMA 5-15P

Output

• Nominal voltage: 115V
• Frequency: 50/60Hz
• Frequency stability: 50/60Hz ± 1Hz
• Waveform: Modified Sine Wave
• Total outlets: 8 (NEMA 5-15R)
• Full battery / surge protection outlets/ AVR: 4
• Surge protection only outlets: 4

Battery

• Type and quantity: One 12V 4Ah cell
• Backup time: 7 minutes
• Recharge time: Recharges back to 90% of its capacity within 5 hours in line mode

Voltage regulation

• Buck: 120-128V
• High cutoff: 140-148V
• Boost 1: 98-106V
• Boost 2: 84-92V
• Low cutoff: 70-78V

Line/Battery Transfer

• Typical transfer time: <6ms

Alarms/Indicators

• Visual indicators: Normal AC input: blue LED light Battery back-up: red LED light
• Audible alarm: Battery mode: beeps twice every 8 seconds Low battery: beeps four times every second Overload and fault: beeps continuously

Protection

• Full protection: Line mode: 120% ± 10%, shuts down after 4 seconds and transfers to fault mode Battery mode: 100% ± 10%, audible warning, will shut down after one minute, and then transfer to fault mode

Physical appearance

• Dimensions: 8.2 x 5.1 x 3.8 in
• Color: Black
• Cord length: 3.2 ft
• Weight: 8.8 lb

NT-511D UPS 120V 500VA/250W

Forza’s NT series is designed to provide electric protection for your personal computer and peripherals.With its compact size, the unit is ideal for small work spaces at the office or at home. Although small in size, it provides the maximum protection against the constant threat of electrical supply outages.

HIGHLIGHTS

• Uninterruptible power system
• Power protection for home and office equipment
• Automatic voltage regulator
• Boost and buck AVR to stabilize voltage
• 6 outlets with surge protection, battery back up and
• voltage regulation
• Phone, Fax & modem protection (RJ-11)

Smart UPS
LCD 120V USB 1500VA

Forza FX Series offers an enhanced level of protection specially designed for your high performance office equipment like servers, sensitive electronics and home theater components.

It features a coaxial surge protection line and LCD display, in addition to a battery-supported system (UPS), allowing you ample time to save your important information and shut down all your equipment safely during power failures.

Interactive UPS with coaxial protection and USB charging ports
750VA/375W

The Forza HT series is a line interactive Uninterruptible Power Supply (UPS) designed to provide clean power to your office equipment, electronics and home theater components along with an enhanced level of protection.

It prevents performance degradation and data loss by keeping your valuable equipment powered during outages and other voltage fluctuations in the power line. By integrating a convenient LCD display, coaxial surge protection and battery backup capabilities in a single unit, the HT series emerges as the best in its class for its performance, quality and compact footprint. It comes in 750VA and 1000VA configurations.

Highlights

• UPS with line interactive topology
• Convenient LCD displays real time status information
• Network/phone protection
• Coaxial line protection
• Twelve (12) NEMA 5-15 outlets, two of which are widely spaced to accommodate bulky adapters
• Six (6) outlets with AVR and battery backup, plus six (6) surge-only outlets
• Two 2.1-amp USB charging protected ports on top panel
• Easily removable/replaceable battery
• Ideal for home and office applications

NT-751D UPS 120V 750VA/375W

Forza’s NT series is designed to provide electric protection for your personal computer and peripherals.With its compact size, the unit is ideal for small work spaces at the office or at home. Although small in size, it provides the maximum protection against the constant threat of electrical supply outages.

HIGHLIGHTS

• Uninterruptible power system
• Power protection for home and office equipment
• Automatic voltage regulator
• Boost and buck AVR to stabilize voltage
• 6 outlets with surge protection, battery back up and
• voltage regulation
• Phone, Fax & modem protection (RJ-11)

Part Number / Código del Producto: NT-751D

Emergency backup
Power supply

Power surge
Spike protection

Visual LED

Output
6 Connectors

AVR
Protection

Phone line
Protection

• 600VA / 330W Simulated Sine Wave UPS
• Sealed Lead Acid Battery
• 7 Total AC Power Outlets
• 1 USB Type-A Port
• Audible Alarms

Protect up to 7 devices from power surges and spikes with the BE600M1 Back-UPS 600VA UPS with Battery Backup from APC. This uninterruptible power supply features 7 AC outlets and a USB port to safely provide power to up to 8 devices. Audible alarms indicate changes in power, battery failure, wiring problems, and if a battery was disconnected in order to keep you informed. Additionally, there are LED indicators to quickly inform you of the status of the unit.

• 600 VA (330W) power rating
• Simulated sine wave UPS with battery
• Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in varying environments
• Automatic self-test ensures early detection of failing batteries
• Battery failure notification provides an early warning of when a battery is dying
• Building wiring fault indicator informs users of potentially dangerous wiring
• The unit can provide temporary battery power when utility power is lost
• Hot-swappable batteries allow for easy battery replacement without losing power
• Transformer block spacing provides enough space for larger power adapters
• Intelligent battery management ensures efficient battery maintenance
• Five battery backup outlets and two surge-only outlets
• $75,000 equipment protection policy against damaged connected equipment