Back UPS Pro BX 850VA, 8 Outlets, AVR, LCD interface, LAM 60Hz
Audible alarms
Automatic self-test
Battery failure notification
Battery replacement without tools
Boost Automatic Voltage Regulation (AVR)
Building Wiring Fault Indicator
Cold-start capable
Dataline surge protection
Disconnected battery notification
Hot-swappable batteries
Intelligent battery management
LCD graphics display
Resettable circuit breaker
Safety-agency approved
Transformer Block Spacing
USB connectivity
User-replaceable batteries
- Provides notification of changing utility power and UPS power conditions
Automatic self-test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
- Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Boost Automatic Voltage Regulation (AVR)
- Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Building Wiring Fault Indicator
- This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
- Provides temporary battery power when the utility power is out.
Dataline surge protection
- Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
- Warns when a battery is not available to provide backup power.
Hot-swappable batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
- Maximizes battery performance, life, and reliability through intelligent, precision charging.
LCD graphics display
- Text and mimic diagrams that display modes of operation, system parameters and alarms.
Resettable circuit breaker
- Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Safety-agency approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Transformer Block Spacing
- Connect bulky transformer block plugs without covering up other outlets.
USB connectivity
- Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
- Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Back-UPS Pro Features & Benefits
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Provides protection of connected equipment from power surges on the data lines.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Serviceability
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Increases UPS availability by allowing quick, easy battery replacement.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Availability
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Provides temporary battery power when the utility power is out.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Secured and trusted checkout with
- Omschrijving
-
Details
Output Output Power Capacity 510 Watts / 850 VAMax Configurable Power (Watts) 510 Watts / 850 VANominal Output Voltage 120VOutput Frequency (sync to mains) 60 HzLine InteractiveWaveform Type Stepped approximation to a sinewaveOutput Connections (4) NEMA 5-15R (Battery Backup) , (4) NEMA 5-15R (Surge Protection)Input Nominal Input Voltage 120VInput Frequency 60 Hz +/- 3 HzInput Connections NEMA 5-15PCord Length 1.83 metersInput voltage range for main operations 88 - 139 VMaximum Input Current 12 AInput Breaker Capacity 15 ABatteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofIncluded Battery Modules 1Typical recharge time 12 hour(s)Replacement Battery RBC17RBC Quantity 1Communications & Management Interface Port(s) USBControl panel Multi-function LCD status and control consoleAudible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarmSurge Protection and Filtering Surge energy rating 1103 JoulesFiltering Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneousData Line Protection Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector) , RJ45 10/100/1000 Base-T Ethernet protection - Reviews
-
Schrijf je eigen recensie
- Labels
-